Jafsu Enterprises is a streetwear manufacturer cutting and sewing hoodies, tees, joggers and tracksuits to your own pattern and written spec, not to someone else’s blank. Samples start at one piece, production at 20, and every print, stitch and label happens in our own building in Sialkot — which is what keeps drop two matching drop one.
WhatsApp +92 347 0849427 · info@jafsuenterprises.com · every enquiry answered within 24 hours
A streetwear manufacturer makes hoodies, tees, joggers and tracksuits from your own patterns and chosen fabric, then prints, embroiders, labels and packs them under your brand. Jafsu Enterprises does that from a single sample piece and 20-piece production runs in Sialkot, Pakistan, shipping finished orders to the UK, USA, Canada, the EU and Australia.
Streetwear wholesale manufacturers sell finished blanks by the carton; a print-on-demand clothing manufacturer decorates one garment and posts it out. Neither gives you a pattern, a fabric weight or a neck label of your own. A streetwear manufacturer starts at the fabric roll — where custom street clothing stops being someone else’s garment with your graphic on it.
The harder question is not who makes your first 20 pieces, but who makes the next 200 identically. Brands usually leave after the reorder — when the fleece returns a shade lighter or the print sits low on the chest.
That is not bad luck; it is what happens when the spec lives in a chat thread instead of a written sheet. The numbers below are what that sheet should contain, so you can hold any streetwear manufacturer to them.
Six garments cover almost every capsule that leaves the floor, each cut to your measurements and fabric weight — never a stock body with a logo added at the end. Outerwear and smart-casual pieces run on the same floor: bomber, varsity, windbreaker, puffer and polar fleece jackets, plus polo shirts.
Pullover, full-zip and half-zip bodies in brushed three-end fleece, with double-lined hoods, kangaroo pockets and matched ribbing. Drop-shoulder blocks are patterned separately, not graded up — scaling a regular body gives a large hoodie, not an oversized one. See the hoodie options.
Combed cotton and CVC jersey in boxy, drop-shoulder or classic bodies. Weight decides most tees: thin jersey drapes and creases, heavier jersey stands square on the shoulder. Our t-shirt production covers both ends.
The hoodie fleece family in set-in or drop-shoulder builds, with V-inserts and ribbed hems. French terry leaves its loops unbrushed, so it breathes and takes a crisper print; brushed fleece trades that for warmth. See our crewneck sweatshirt builds.
Tapered, straight and relaxed legs with drawcord waists, zip, ribbed or open hems and cargo pockets. Joggers ordered with hoodies are cut from the same dye lot — two lots of one colour read as a mismatch on the rail. See our joggers and sweatpants and cargo pants.
Two-piece tracksuit sets in fleece or micro-poly, cut from one dye lot with matching trims. Sets lift average order value faster than anything else — and a set half a shade apart comes back as faulty even when both pieces pass alone.
Fleece and woven shorts with drawcord waists, pockets and raw, ribbed or coverstitched hems at your inseam. Summer capsules also run as tanks and lighter tees, so you keep one block and change weight between seasons.
Send these to every streetwear manufacturer you shortlist. The ones worth working with answer in numbers; the rest answer with adjectives.
A streetwear manufacturer quoting against this sheet instead of a photograph can cost it in 24–48 hours, and the sample you approve becomes the spec bulk is measured against.
Cutting, stitching, printing, embroidery, labelling and packing all happen in one building — the advantage of a streetwear manufacturer that brokers nothing out. Measurements checked at inspection are the ones written at quoting, and your patterns and artwork stay yours.
Every streetwear manufacturer should publish these in both units, because a factory quoting in GSM and a buyer costing in ounces are describing the same cloth. The conversion factor is 33.906.
| Garment | Fabric and construction | GSM | oz/yd² |
|---|---|---|---|
| Tees, tanks, polos | Combed cotton, CVC, cotton-elastane jersey | 180–280 | 5.3–8.3 |
| Sweatshirts, hoodies | French terry (unbrushed) or 3-end brushed fleece | 320–450+ | 9.4–13.3 |
| Joggers, sweatpants | French terry, 3-end fleece, matched dye lot | 320–450+ | 9.4–13.3 |
| Tracksuits | Fleece, or micro-poly for performance builds | 140–450+ | 4.1–13.3 |
| Shorts | Cotton jersey, fleece or woven | 180–450 | 5.3–13.3 |
| Stage | What happens | Quantity / time |
|---|---|---|
| Mockup | Spec reviewed, artwork placed, itemised costing returned | 24–48 hrs |
| Sample | One sewn piece for fit, hand-feel and decoration sign-off | 1 pc · 7–10 days |
| First drop | One design and colourway, split across S–XXL | 20–40 pcs |
| Bulk 50–300 pcs | Production with inline and endline inspection | 14–18 working days |
| Bulk 500–1,000+ | Volume run; price breaks at 100 / 300 / 500 / 1,000+ | 20–25 working days |
| Dispatch | DHL, FedEx or UPS express, door to door | 4–6 business days |
| Payment | Samples 100% advance; bulk 50% deposit, balance before dispatch against QC photos and video | PayPal · Remitly · Western Union · wire |
Drag to see the same cloth in both units, and what that weight is usually cut into. Air and sea freight are available where cost matters more than speed.
Every order takes the same five stages, whether it is 20 pieces or 2,000.
Send a tech pack, a reference garment or a sketch with measurements. Back comes a mockup and per-piece costing split by fabric, decoration and trims, so you can see what to change.
Measurements, GSM, construction, tolerances, trims and print placements confirmed in writing. Revisions here cost nothing; the same one after cutting costs a run.
One sewn garment in your fabric, fit and decoration. Wash it, wear it, measure it. Nothing goes to bulk until you approve this piece.
Spreading, cutting, stitching, screen printing or embroidery, then labelling and packing, with inline and endline checks.
QC photographs and video reach you before the balance falls due, then express dispatch with tracking and paperwork handled here.
Streetwear brand manufacturers see the same four buyers. The brief changes; the line does not.
Working as a manufacturer for e-commerce brand owners means matching drop cycles, not seasons — 20 pieces per design lets you shoot, list and sell before the next one is cut.
The graphics sell and the blank is the ceiling. This is where a custom streetwear manufacturer beats a streetwear maker working from stock: your own body, weight and neck label.
Distributors and stockists ordering repeat volume from a streetwear bulk supplier, with price breaks at 100, 300, 500 and 1,000+ pieces.
Merch programmes and ranges alongside our fitnesswear production, so one order covers hoodies, tees and gym pieces.
Samples start at one piece and bulk at 20 pieces per design and colourway, split across S to XXL. Most streetwear apparel manufacturers ask for 200 to 1,000 pieces, so a 20-piece run lets a new label release a real drop without funding stock it has not yet sold.
Ask every streetwear manufacturer on your shortlist for the same six numbers: fabric weight in GSM and oz/yd², knit construction, composition and finish, shrinkage tolerance, measurement tolerance and exact trims. The best streetwear clothing manufacturers answer in figures; the rest say premium and one-stop. Then sample the two best answers.
Per unit, no. Print on demand carries no inventory risk, but per-piece cost is the highest of the three models and you inherit the supplier’s blank, fit and neck label. Most brands test graphics with a print on demand clothing manufacturer, then move to a streetwear manufacturer once a design repeats.
Yes. We manufacture in Sialkot, Pakistan and ship door to door to the USA, UK, Canada, Europe and Australia by DHL, FedEx and UPS, usually 4 to 6 business days. Choosing a streetwear manufacturer USA-side trades transit time against unit cost; our quotes stay landed-cost comparable at volume.
Most sit between 320 and 450+ GSM, or 9.4 to 13.3 oz/yd². Around 320 GSM, French terry breathes for spring drops and takes a crisp screen print. From 400 GSM up, three-end brushed fleece holds an oversized silhouette and gives embroidery a fuller finish.
Knits are allowed up to 5% dimensional change under the Sanforized standard, and cotton fleece at 280 to 360 GSM commonly loses 3 to 5% in length on a warm wash. Compacted and garment-dyed fabrics move less. Agree a tolerance before sampling so it is built into the pattern.
Cost drops through fewer SKUs, more units per design, simpler decoration and a locked spec — not thinner fabric. Price breaks apply at 100, 300, 500 and 1,000+ pieces. Affordable streetwear manufacturers itemise a quote by fabric, decoration and trims so you can see which line to adjust.
Yes. Repeat runs are produced against the same written spec, with price breaks at 100, 300, 500 and 1,000+ pieces and lead times of 14 to 18 working days for 50 to 300 pieces, or 20 to 25 for 500 to 1,000+. Payment is a 50% deposit, balance before dispatch.
Itemised costing and a mockup within 24–48 hours, a sewn sample in 7–10 working days, production from 20 pieces — from a streetwear manufacturer that answers every enquiry inside a day.
WhatsApp +92 347 0849427 · info@jafsuenterprises.com · Instagram @jafsusports · every enquiry answered within 24 hours